We use several cookies on our site read about them here in our privacy policy.
EN / CN

Normal questions

Why does the ink strip come out with the D1 tag strip when I print the label?

The ink tape in the label tape box may be loose. Remove the label tape box from the label maker, then make sure the ink tape fits tightly to the label. If the ink tape is loose, tighten it by turning the black reel in the label tape box clockwise until the ink tape is snug against the label tape. The ink tape of the label tape box may be damaged or cracked. If damaged or cracked, replace the label belt box.

Is the material of our ribbon shell PET?

The general use of black is ABS material, but D series tan lid is used PC material.

Is the band of RL-D-45013P made of polyester or vinyl?

RL-D-45013P uses polyester (PET) material;

Is the case of Rhino ribbon the same case?

 The upper and lower shell is shared, only the raw materials are different;

D1 series: 1) Is it waterproof, friction-proof and can it be exposed to the sun? Can it be used outdoors? 2) Is it corrosion resistant (such as oil and salt in the kitchen, acid and alkali in the factory, etc.)?

D1 series is heat transfer printing (with carbon tape printing) can be pasted outdoors, and waterproof, anti-friction, anti-corrosion (25% alcohol, oil), can be exposed to the sun, but for a long time the label will fade and crack, outdoor use and special environment use, will speed up the product aging.

Online Service

Online Service
×

Tel:

13825601320 (Sarah)

Skype:

contact@ggimage.com